scrog technique

ScrOG technique includes lower plant tallies, normally 1 plant for every 2’x2′ region. Veg periods shift, with longer veg periods bringing about overhangs bigger than 2’x2′. Screens are utilized to encourage plant preparing which brings about short shaggy plants with essentially all objective bud destinations in the best lighting zone. ScrOG strategy is touted to create 2 to multiple times the yield of customary developing techniques.

learn scrog

Scrogging, or screen of green, is a type of LST (low pressure preparing) where the primary objective is to amplify the impression of your light. With standard, Christmas tree style plants, you can just lower the light until it’s nearby enough to the top cola. ANY bud from that point down is getting less light. With a conventional arrangement, the lower each bud is on the plant, the less light those buds get.

The scrog procedure is finished by isolating, or separating the primary cola, related to raising all the lower bud up to the shelter.

We develop the plant on a level plane until we are half a month into the Flowering stage.

This is a key point the same number of endeavors at Scrogging ends up being just a skeletal help structure for standard plants, not genuine Scrogs.

The most effective way to scrog your cannabis and maximize yields

Regardless of whether you haven’t developed cannabis, you’ve likely observed pictures of cannabis crops, both indoor and outside, with bug buds growing up through a nylon screen. This screen is known as a scrog, another way to say “screen of green.”

Scrogging will improve the nature of your cannabis plants and increment yields. There’s a workmanship to putting a lot of plants together and loosening up their appendages so they don’t develop over one another or conceal each other out, yet we’ll demystify the procedure.

Remember that each plant is extraordinary and there’s no particular estimation for how close or far separated each plant or branch ought to be. Scrogging includes perusing a plant to perceive what it needs and as a rule includes some calibrating. Be that as it may, with a brief period and tolerance, your plants will be sound and rich.

Why Scrog Your Cannabis?

Put on during the blossoming stage or just before it, a scrog has a couple of primary capacities:

It loosens up branches to open more hubs to coordinate light, along these lines expanding your yield.

Extending branches expands the wind current through a plant, averting bud spoil.

A scrog adds backing to branches so they won’t slump over or break as buds get greater.

The entirety of the branches over the screen will round out with thick buds and the majority of the foliage underneath the screen will get concealed out. You need to prune these base branches and dead leaves since they either won’t deliver buds or will create shoddy buds. You’ll capitalize on your plant in the event that you can divert assets from those branches to the quality buds over the screen.

Setting Up 

To begin, pick a lot of plants, in a perfect world of a similar stature and size. It’s difficult to scrog plants of various sizes on the grounds that the screen should be level over the entire overhang with the goal for light to disperse uniformly.

Nylon screens come in various work sizes, generally 4-6″ square. For a littler develop, attempt a 4″ work.

At the point when Your Plants Don’t Have to Move

Scrogging is simpler when your plants remain in one spot all through as long as they can remember, from vegetative stage to blossoming, however relying upon your arrangement, you may need to move them.

In this circumstance, you can simply set the screen (more beneath) after you’ve done the entirety of your garnish and let the plants develop into it. You’ll need to finish up the screen a couple of times over the coming a long time to ensure branches are scattered equitably and not very swarmed.

At the point when Plants Have to Move Into a Flowering Space

Ensure your plants are in their last spot since you won’t have the option to move them once under the screen. Plants likewise should be transplanted to the suitable size of pot.

why to scrog

Plant Placement and Spacing

Plants should be set so they aren’t packed, however not so far away that there are large holes in the shelter. You do need some space in the middle of plant branches when they are pulled up through the scrog—plants will even now develop and fill shortly in light of the fact that they have in any event two months to experience the blossoming cycle.

Plants should be put so they aren’t packed, yet not so far away that there will be large holes in the covering.

As a rule, for a 4′ x 8′ plate, have a go at placing in 18 or 21 plants in 5-gallon pots. That would give you three lines of either six or seven plants and should give you a feeling of what number of plants will fit together. You can alter as needs be, founded on plate and pot size.

When all plants are set up, it can crease the branches back a tad to prepare them for the screen. Be cautious during this progression! It’s anything but difficult to snap branches.

Crease fans out and away from the principle stem, similar to a blossom opening up or stripping a banana. Likewise remember that a few strains are sturdier than others and can withstand all the more bowing.

Extending the Screen

You’ll require at any rate four purposes of contact to put the screen on. Most producers will utilize a vertical expansion that can withstand some power, similar to a two-by-four or a T-post, at each edge of the shelter.

There are two different ways to put on a screen:

Spot each side of the screen on each post in turn, extending the screen as you go.

Put the screen on every one of the four contact focuses fairly freely and fix it down later.

After the screen is on, shimmy it down until it’s over the plants. In a perfect world, you need the screen around 6-9″ over the least expanding of the plants—this is the primary fixing you gave the plant and the principal point where the plant begins stretching, after the stem leaves the dirt.

When the screen is set up, ensure it’s tight, particularly the edges. The more tightly it is, the more it will have the option to hold shape and hold the heaviness of creating buds. Zip ties prove to be useful here.

You can snatch a piece of the screen and draw it back and zip attach it to a post to fix it up. Each point ought to be fix about a similar sum, with the goal that the screen doesn’t turn out disproportionate. Be mindful so as not to pull the screen excessively tight, as it may snap scrog technique.

Setting Branches

By the day’s end, the branches in the screen should interlock with the parts of the various plants around it. Consider spreading out your hands and placing the fingers of one submit between the fingers of your other hand.

A significant inquiry to pose before placing branches into the scrog is: Where does the branch need to go? On the off chance that a branch wouldn’t like to remain where you put it, you may need to put it elsewhere. Try not to compel it.

Attempt to fill each square work of the screen with a solitary branch—abstain from placing two branches in a single square and make an effort not to leave a square unfilled. This will guarantee that each branch gets enough space and light and that the screen is used to its most extreme potential. You will most likely be unable to do these contingent upon how much plant material you have, yet they are great rules to pursue.

A significant inquiry to pose before placing branches into the scrog is: Where does the branch need to go?

Stretch a branch out the extent that it can go, pull it up through the screen, and lay it on the screen. On the off chance that it fails to work out, pull it back one work nearer to the fundamental stem of the plant.

A decent spot to begin the scrog is a corner, at one of the posts. Work your way down one of the edges to the following post, and afterward do another edge until all edges are filled in, at that point take a shot at the center.

scrog technique Works deliberately, placing the parts of one plant into the screen before proceeding onward to the following plant.

In case you’re experiencing difficulty with a specific branch, one stunt is to pivot the whole plant—by getting the pot and turning it—so the branch being referred to is presently confronting where you need it to go.

After you’re done, it’s a smart thought to look beneath the screen to ensure you didn’t miss any branches. Assuming this is the case, simply pop them back in the screen.


Scrogging can worry a plant, extending the entirety of its branches around. You’ll presumably see that your plants look a little wilty, or like they “endured a shot” in the wake of doing this scrog technique. Be that as it may, dread not—under some immediate light, they’ll ricochet back, and putting them through the scrog will be justified, despite all the trouble over the long haul.

It’s a smart thought to water your plants inside 24 hours of scrogging them, just to give them a little lift to pass the pressure of the system.

It’s additionally a smart thought to check the scrog 2 after 3 days to clean it up. The plants will have developed into the screen a smidgen in those couple of days, and you’ll have a superior feeling of where each branch needs to go and where every one of the buds will create.

Over the screen, an excellent shade of buds will create and fill in. But since the shelter turns out to be thick with buds, anything underneath the screen will get concealed out and no amazing.scrog technique is essential to tidy up dead leaves and prune little branches that don’t get light under the screen.

These branches may begin creating buds, yet they won’t merit your time and exertion. It’s smarter to dispose of them and have the plant divert assets to the buds over the screen, making those better and progressively energetic.

To learn more about scrog technique go to

en English
error: Content is protected !!